Miscelatori gravimetrici
Miscelatori ad alta capacità
Impianti di betonaggio mobili
Sistemi di trasporto inerti
Casseforme
A plant that weighs what it produces.
The G Series weighs every material in real time, instead of estimating it by eye or by volume. The result: zero waste, a lower production cost and a plant that never stops.
Weighs
Sand, cement, water and additives are automatically weighed by certified load cells: they are not estimated, they are measured to the kilo.
Mixes
The weighed materials are mixed continuously, with no stops between loads, in a constant production flow.
Produces
A ready-to-use material comes out, always identical to the previous one: same quality, same yield, zero surprises.
The technological heart of the G Series.
Four plants, one logic.
From job-site production to large scale: choose the power best suited to your project, or go to the full spec sheet for each machine.
Why choose the G Series.
Material recycling
Turns job-site waste into finished product, reducing disposal costs and increasing margin.
Total versatility
Not just concrete. It produces cold asphalt, stabilized soil, mortar and many other mixes with a single machine.
Continuous efficiency
40-80 m³/h of production with no stops. Ideal for medium and large job sites with steady rhythms, avoiding interruptions between cycles.
Guaranteed quality
Every mix is identical to the previous one, thanks to certified gravimetric dosing cycle after cycle.
What you can produce.
Concrete 
Mortar 
Screed 
Cold asphalt 
Fiber-reinforced concrete 
Recycled 
Fast-setting 
Stabilized soil 
Colored Did you know Kimera plants can automatically dose additives during mixing?
Return on investment in numbers.
Innovation vs. obsolescence.
Not all plants measure materials in the same way. The difference between gravimetric and volumetric dosing is not a marginal technical detail: it directly affects precision, waste and quality consistency, batch after batch.
Kimera systemGravimetric dosing
Every component is weighed with load cells and corrected in real time during mixing, regardless of moisture and density.
Volumetric dosing
Materials are measured based on the space they occupy, without accounting for their actual weight.
Industry 4.0: your plant pays for itself.
Kimera plants, equipped with a PLC and measurement sensors, may qualify as eligible capital goods under the Industry 4.0 Plan: a package of state incentives that reduces the real cost of the investment, including tax credits and subsidized financing.
Why choose the G Series over the D Series?
Same Kimera build quality, two dosing philosophies designed for different needs: here’s when the G Series really makes the difference compared to the D Series.
G Series
When to use it: continuous production, recycling, sustainability.
D Series
When to use it: complex mixes, fibers, pigments, sophisticated additives.
Compare the G Series models.
 |  |  |  | |
| Maximum production speed | 40 m³/h55 yd³/h | 40 m³/h55 yd³/h | 50 m³/h65 yd³/h | 80 m³/h110 yd³/h |
| Full load production | 4 m³6.5 yd³ | 7 m³9.5 yd³ | 9 m³12 yd³ | 9 m³12 yd³ |
| Hopper capacity 1 | 2,70 m³3.50 yd³ | 4,50 m³6.00 yd³ | 5,50 m³7.20 yd³ | 5,50 m³7.20 yd³ |
| Hopper capacity 2 | 2,70 m³3.50 yd³ | 4,50 m³6.00 yd³ | 5,50 m³7.20 yd³ | 5,50 m³7.20 yd³ |
| Water capacity | 1000 l265 gal | 2000 l530 gal | 2000 l530 gal | 2000 l530 gal |
| Cement capacity | 2000 kg4000 lbs | 2500 kg5500 lbs | 3000 kg6700 lbs | 3000 kg6700 lbs |
| Maximum aggregate diameter | 50 mm2″ | 50 mm2″ | 50 mm2″ | 75 mm3″ |
| Height | 2300 mm7.55 ft | 2477 mm8.12 ft | 2477 mm8.12 ft | 2588 mm8.50 ft |
| Length | 5453 mm17.89 ft | 6648 mm21.81 ft | 7511 mm24.64 ft | 8444 mm27.70 ft |
| Width | 2300 mm7.54 ft | 2300 mm7.54 ft | 2300 mm7.54 ft | 2300 mm7.54 ft |
| Weight | 4000 kg8800 lbs | 4500 kg9900 lbs | 5000 kg11000 lbs | 6000 kg13000 lbs |
Frequently asked questions.
In general, installing Kimera machinery does not require specific permits. Any requirements may vary depending on local regulations and the plant configuration. Our technical team is available to check every aspect and support you with proper integration.
Yes. Kimera machinery is designed to adapt to different operational needs and can be configured according to specific production requirements. Our team supports the customer in defining the solution best suited to their plant.
Yes. Thanks to the programmable recipes integrated into the onboard computer, the same plant can produce different types of product, such as pumpable concrete, fluid mortars, self-leveling or self-compacting formulations. Switching between recipes is simple and allows production to be quickly adapted to different operational needs.
Times vary depending on the configuration chosen and the complexity of the plant. Under standard conditions, installation and commissioning are completed quickly, minimizing the impact on production. Our specialized technicians also handle startup and commissioning of the machine, with detailed planning before delivery.
We offer qualified technical support, after-sales assistance and spare parts availability. Our goal is to ensure operational continuity and maximum reliability over time.
Yes. Kimera machinery is designed with Industry 4.0 in mind and may qualify for the tax incentives provided for investments in technologically advanced capital goods. The benefits depend on current regulations, so we recommend consulting your accountant or our technical team to assess the opportunities available.
Frequently asked questions.
Quickly find answers to your production needs
Every project developed, every market reached, every plant delivered is the result of all-Italian engineering, built on quality, reliability and the ability to anticipate the needs of a constantly evolving industry.