Miscelatori gravimetrici
Miscelatori ad alta capacità
Impianti di betonaggio mobili
Sistemi di trasporto inerti
Casseforme
The Kimera D720 is a compact mobile concrete batching plant, designed for job sites that require greater production capacity without giving up the practicality of a batch-cycle plant.
With a full load production of 7 m³ and a maximum speed of 12 m³/h, it offers a significant capacity increase over the base model, while maintaining the same dosing precision for every batch.
The D720 is the ideal solution for medium-sized job sites that require higher production volumes, consistent quality and maximum process control.
| Hopper capacity 1 | 4,20 m³5.50 yd³ |
| Hopper capacity 2 | 4,70 m³6.20 yd³ |
| Water capacity | 1.350 l355 gal |
| Cement capacity | 2.200 kg4,900 lbs |
| Max aggregate diameter | 50 mm2" |
| Height | 2.560 mm8.40 ft |
| Length | 6.187 mm20.30 ft |
| Width | 2.500 mm8.20 ft |
| Weight* | 4.300 kg9,500 lbs |
Structure
High-strength steel frame, base color gray RAL 7040.
Extraction belts
2 independent extraction belts for aggregates, class 200 reinforced with 2 plies. Each belt is supported by 21 rollers with internal bearings and a monolithic rubber-coated drive drum with a wear-resistant grooved profile. Driven by a variable-speed hydraulic gear motor.
Hoppers
Electric vibrator installed on hopper 1 (normally used for sand).
Cement silo
Equipped with an extraction and dosing screw conveyor with a hydraulic motor. Fitted with an electric vibrator. Mounted on 3 OIML R60 class shear beam load cells. Complete with a ladder and inspection platform.
Water system
3 high-resistance cross-linked polyethylene tanks, red RAL 3020, capacity 450 liters each, one of which is fitted with a visual level indicator. Centrifugal pump with hydraulic motor, electronic flow meter and suction filter with integrated shut-off valve for inspection operations.
Electrical/electronic system
System with IP67 protection rating, complete with a control panel featuring buttons and a 12" color screen. Available functions:
- Setting the production recipe
- Display of the last 100 production cycles
- Storage of up to 100 recipes
- Storage of up to 100 customers
- Control and calibration of the load cells
- Monitoring of engine status and fuel level
- Display of maintenance alerts
- Editing of production cycle settings
- Display of working hours and total cubic meters produced
- Download via USB key of reports of the last 200 production runs
Mixer
Fixed mixer with mixing shaft and interchangeable 12 mm HARDOX® 450 paddles. Driven by a hydraulic gear motor. Mixer body in HARDOX® 450 with a total thickness of 8 mm. Mounted on 4 OIML R60 class shear beam load cells. Lower discharge hatch with hydraulic piston opening and closing.
Hydraulic system
300-liter oil tank with cap and visual level indicator. Oil filter with interchangeable cartridge for the high-pressure line and spin-on filter for the low-pressure line. ON/OFF electro-hydraulic valves. Electric heat exchanger with automatic activation at 42°C.
The main advantages.
What you can produce.
Concrete
Mortar
Screed
Colored
Did you know that Kimera plants can automatically dose additives during the mixing phase?
Configuration complete.
Every job site has different needs. That's why the D720 is available with a wide range of options that allow the machine to be customized based on the application, type of work and operating conditions. A tailored configuration to get the best performance in any context. The sections below gather all the options and accessories available for the D720.
Mobility options.
Solutions designed to adapt to the job site, not the other way around. Compact, modular and reconfigurable plants that allow production to be moved where and when needed, without interrupting processes and maintaining operational continuity, precision and reliability. Every configuration is designed to ensure maximum efficiency in dynamic contexts, reducing downtime and increasing production flexibility in the field.
Power supply solutions.
The D Series is designed to operate in complete energy autonomy, without relying on external connections. The auxiliary engine powers the entire hydraulic system, including hoppers, mixer, cement silo, water system and all onboard systems, ensuring continuous production in any operating context.
The right mixer for your material.
Every D Series plant can be configured with the mixer best suited to the material you need to produce: single-shaft for fluid mixes, planetary for vibrated concrete.
Single-shaft mixer
A horizontal shaft with interchangeable HARDOX® paddles ensures laminar flow ideal for fluid, pumpable mixes.
Planetary mixer
The mixing unit orbits and rotates simultaneously, ensuring complete dispersion of every ingredient. Ideal for technical recipes with additives, fibers and pigments.
The right pump to transport what you produce.
Complete the plant with the most suitable pumping system: piston pump for concrete over long distances, screw pump for mortars and fluids with continuous flow.
Piston pump for concrete
Transports concrete directly from the mixer over long distances or to height. Managed via screen and remote control, it operates independently of the production cycle.
Screw pump for mortars and fluids
Suitable for fluid materials such as mortars, self-leveling screeds and fine-grained mixes. Continuous, pulsation-free flow, ideal for flooring installation and finishing applications.
Other accessories.
Liquid additive kit with a maximum flow rate of 3.2 l/min, consisting of a 27-liter tank, diaphragm pump and electromagnetic flow meter. Maximum allowed viscosity 1.4 mPa·s, usable only with conductive liquids. Maximum 2 kits per plant.
2 high-brightness LED work lights. IP68 protection, 288W, 28,800 lumens. For safe operation even in low-light conditions.
Steel hose reel with automatic spring return. Hose length 20 m. Available only in combination with the pressure washer.
Glass fiber dosing system with a 20 kg roll, maximum flow rate of 2 kg/min and volumetric dosing. Requires a compressed air line.
Multifunction remote control for starting/stopping production and opening/closing the discharge hatch.
Control box for automatic filling of the cement silo from an external source. Voltage 380V 16A.
Infrared probe for measuring the moisture content of any type of aggregate. Calibration via RJ19 cable and dedicated software. Allows the system to automatically correct the amount of water based on the aggregates' moisture content.
Available in a manual version, with centralized greasing points, or an automatic version, with an electric pump and centralized proportional distributor for constant, uniform lubrication without manual intervention.
Painting of the plant in a special color of the customer's choice.
Thermal printer for printing production receipts. Customizable header with the company logo. Possibility of saving up to 100 customers and printing their details on each receipt.
Hydraulic pressure washer with 15 m of hose, pressure adjustment knob and lance for high-pressure washing up to 100 bar.
Kit with quick hydraulic couplings for external use (conveyor belt, bag breaker screw). Flow rate 30 l/min, maximum pressure 130 bar, manual activation. Quick-connect fittings on the usage side included.
Powder dosing system (normally concrete coloring pigment) with weighing system and electric vibrator. Silo volume 80 liters.
Electric vibrator mounted on aggregate hopper 2.
12V signal for automatic filling of the cement silo.
Bidirectional communication system with UMTS/4G modem and integrated GPS for plant geolocation. Web portal for telemetry, production history and remote recipe transmission. Industry 4.0 certification. Annual subscription cost: €560.
Available with manual lever-operated opening and closing via hydraulic pistons, or motorized on aluminum guides with radio remote control.
Your plant, monitored around the clock.
Every Kimera plant is equipped with a PLC and precision sensors that turn it into a fully connected machine: real-time telemetry, constant production monitoring and predictive maintenance alerts, accessible from anywhere through a dedicated web portal.
Base rate 20% of the cost for investments up to €2.5 M | Reduced 10% up to €10 M
Compare the D Series models.
 | |  | |
| Maximum production speed | 12 m³/h16 yd³/h | 12 m³/h16 yd³/h | 15 m³/h20 yd³/h |
| Full load production | 4 m³6.5 yd³ | 7 m³9.5 yd³ | 9 m³12 yd³ |
| Hopper capacity 1 | 2,60 m³3.40 yd³ | 4,20 m³5.50 yd³ | 5,50 m³7.20 yd³ |
| Hopper capacity 2 | 2,80 m³3.70 yd³ | 4,70 m³6.20 yd³ | 5,50 m³7.20 yd³ |
| Water capacity | 900 l238 gal | 1350 l355 gal | 2700 l715 gal |
| Cement capacity | 1500 kg3,300 lbs | 2200 kg4,900 lbs | 3000 kg6,700 lbs |
| Maximum aggregate diameter | 50 mm2" | 50 mm2" | 50 mm2" |
| Height | 2340 mm7.68 ft | 2560 mm8.40 ft | 2600 mm8.53 ft |
| Length | 5110 mm16.76 ft | 6187 mm20.30 ft | 7701 mm25.26 ft |
| Width | 2500 mm8.20 ft | 2500 mm8.20 ft | 2200 mm7.22 ft |
| Weight* | 3500 kg7,700 lbs | 4300 kg9,500 lbs | 7000 kg15,500 lbs |
Frequently asked questions.
Quickly find answers to your production needs
Every project developed, every market reached, every plant delivered is the result of all-Italian engineering, built on quality, reliability and the ability to anticipate the needs of a constantly evolving industry.